We are a manufacturer committed to quality, performance, new technology and, above all, client service and support.

We use the latest hi-tech production techniques. First we design all our go-karts and their components using CAD/CAM technology. Then we take the world's best chrome moly tubing sourced from Europe and the U.S., bend it using computer controlled machines, hand weld it, stress-relieve and heat treat it, powder coat and varnish it – all of this to ensure each and every bare chassis meets our strict quality standards. Next we add Arrow's innovative components, from the 18mm wide self-ventilating rear brake disc right the way through to the innovative Arrow rear axle bearing cassettes and self-centering seat washers. Machined and anodized alloy components feature extensively on our go-karts, ensuring they are as light and strong as possible. Steering shafts, pedals and stub axles are all robot welded.

Over 85% of each Arrow go-kart is produced within our own factory, from raw material to the finished item giving us maximum control over our product quality. Each part is then carefully assembled ensuring the finished product is, without question, of the highest standard. Arrow Karts do combine technology and innovation with performance, a fact proven Worldwide.

It is our promise to offer innovation, performance, quality and, of course, true value for money with each and every Arrow product. We are confident that once you've tried Arrow, you'll agree.

Click Here for Arrow Chassis Parts

FREE SHIPPING! Comet will pay the shipping anywhere in the continental US on orders of two Arrow Karts!
Karts must ship to the same address, free shipping applies to new karts in the box not assembled.

AX-9 125cc CIK Chassis CIK/FIA homologated chassis 104cm wheelbase  32mm diameter stress relieved chrome moly chassis tubing 50mm axle supported by three bearings Arrow’s unique full-height one-piece machined billet alloy rear axle bearing flanges Unique Arrow cam-adjusting rear axle ride height system Radially ventilated 18mm wide rear brake disc Black anodised machined billet alloy four-spot rear brake caliper incorporating air-cooled pistons mounted directly to rear axle full-height bearing flange Black anodised machined billet alloy two-spot front brake calipers with air-cooled pistons Unique Arrow ventilated front brake discs Black anodised twin machined billet alloy brake master cylinders with Arrow’s unique integrated front-to-rear brake balance/bias bar system Carbon fibre laminate floortray Removable/adjustable front torsion bar Removable/adjustable rear torsion bar Braided stainless steel brake lines Machined billet alloy rear brake disc hub Quick-change front wheel track via slideable 50mm long machined billet front wheel hub on lined front disc hub 90mm long machined billet alloy rear wheel hubs Arrow’s unique self-centering seat washers High tensile steel front stub axles 10mm precision ground king-pin bolts Adjustable camber/caster and front ride height Arrow’s unique self-centering king-pin spacer Adjustable Ackerman Machined alloy steering rods Aluminium components anodised gunmetal 2 left and 2 right hand seat stays 9-litre removable fuel tank Arrow embroidered black-spoked flat top suede steering wheel with ‘carbon-fibre-look’ top Unique Arrow fully uni-ball jointed gear selection system. Clutch lever adjustable for position and leverage Unique Arrow CIK/FIA homologated bodywork in ‘Arrow Blue’ Dynamic Arrow graphics kit Douglas M-Series black powder-coated magnesium wheels: Front hub-type 130mm (5.1") wide x 5" diameter; Rear 210mm (8.3") wide x 5" diameter ICC-type exhaust bracket with unique Arrow vibration-reducing exhaust mount The envy of shifter drivers the world over. A great platform for the Aixro Rotary engine as well!
All New! 2009 X-1 CIK Chassis CIK homologated chassis 65mm long machined billet alloy front wheel hubs 30mm diameter stress relieved chrome moly tubing chassis structure with 32mm fixed front cross-beam 104cm wheelbase 50mm diameter hollow axle supported by three bearings Arrow's unique cam-adjusting rear axle ride height system 90mm long machined billet alloy rear wheel hubs Ultra-light quick-change 3-bolt type machined billet alloy sprocket hub 18mm wide grooved and vented rear brake disc. Floating machined billet alloy hub with inbuilt self-loosening system for quick axle changes Black anodised machined billet alloy four-spot brake caliper incorporating air-cooled pistons, mounted directly to rear axle full-height bearing flange Black anodised machined billet alloy brake master cylinder Braided stainless steel brake lines Forged alloy and machined billet alloy 2-piece pedals Carbon fibre laminate floortray Arrow's unique self-centering seat washers Forged high-grade aluminium two-piece stub axles with 17mm machined high tensile steel stub shafts (25mm hollow shafts also available) 10mm precision ground king-pin bolts Adjustable camber/caster and front ride height Adjustable Ackerman Machined billet alloy steering tie rods All aluminium components anodised gunmetal Left and right hand seat stays 9-litre quick-release removable fuel tank Arrow embroidered 'F1 style' black-spoked blue suede steering wheel with flat top and bottom Arrow's unique steering bush with clamp for simple front end alignment 2-piece slide-type engine mount All new CIK homologated bodywork with dynamic 'Captain Arrow' graphics kit Douglas M-Series black powder-coated magnesium wheels: Front bolt-on type 130mm (5.1") wide x 5" diameter; Rear 205mm (8.0") wide x 5" diameter Click Here - PDF File on X-1 Kart
All New! 2009 XE-28 Chassis Stress relieved chrome moly tubing - 28mm main chassis structure with 30mm diameter fixed front cross beam Split front pedal box with Arrow’s unique machined billet alloy adjustable chassis clamp 103cm wheelbase 40mm (or 30mm) axle supported by three bearings Arrow’s unique machined billet alloy one piece bearing flanges Arrow’s unique anti-vibration engine mount Adjustable front and rear ride height Ventilated 18mm wide rear brake disc Machined billet alloy two spot caliper Machined billet alloy master cylinder Machined billet alloy sprocket hub and disc hub Arrow’s unique self-centering seat washers 80mm long machined billet alloy rear wheel hubs 810mm precision ground king-pin bolts Adjustable camber/caster Adjustable Ackerman Machined alloy steering tie rods All aluminium components anodized gunmetal Left and right hand seat stays 6-litre 'quick release' removable fuel tank Arrow embroidered black-spoked flat top suede steering wheel with 'carbon-fibre-look' top Arrow’s unique steering bush with clamp for easy wheel alignment Front nosecone, nassa panel and sidepods in black Dynamic Arrow graphics kit One-piece machined alloy 3 spoke wheels; Front – 130mm (5.1") wide x 5" diameter; Rear – 205mm (8") wide x 5" diameter Click Here - PDF File on XE-28 Kart
AX-9 CIK Chassis CIK homologated chassis 32mm diameter stress relieved chrome moly chassis tubing 104cm wheelbase 50mm axle supported by three bearings Arrow’s unique full-height one-piece machined billet alloy bearing flanges Unique Arrow cam-adjusting rear axle ride height system Radially ventilated 18mm wide rear brake disc Black anodised machined billet alloy four-spot brake caliper incorporating air-cooled pistons mounted directly to rear axle full-height bearing flange Black anodised machined billet alloy brake master cylinder Carbon fibre laminate floortray Split front axle beam with Arrow’s unique adjustable machined billet alloy chassis clamp Braided stainless steel brake lines Machined billet alloy sprocket hub and brake disc hub 90mm long machined billet alloy rear wheel hubs Arrow’s unique self-centering seat washers High tensile steel front stub axles 10mm precision ground king-pin bolts Adjustable camber/caster and front ride height Arrow’s unique self-centering king-pin spacer Adjustable Ackerman Machined alloy steering rods All aluminium components anodised gunmetal 2 Left and 2 right hand seat stays 9-litre removable fuel tank Arrow embriodered black-spoked flat top suede steering wheel with ‘carbon-fibre-look’ top Unique Arrow CIK homologated bodywork in ‘Arrow Blue’ Dynamic Arrow graphics kit Douglas M-Series black powder-coated magnesium wheels: Front hub-type 130mm (5.1") wide x 5" diameter; Rear 210mm (8.3") wide x 5" diameter
AX-9 28/30 Chassis 28mm diameter main rails/30mm diameter cross rail, stress relieved chrome moly tubing main chassis structure with fixed front cross beam Split front pedal box with torsion clamp 102.5cm wheelbase 40mm axle supported by three bearings Arrow’s unique machined billet alloy one piece bearing flanges Arrow’s unique anti-vibration engine mount Two rear axle ride height settings Removable ‘4th Rail’ side torsion bar Removable/Adjustable rear torsion bar Ventilated 18mm wide rear brake disc Machined billet alloy two spot caliper Machined billet alloy master cylinder Machined billet alloy sprocket hub and disc hub Arrow’s unique self-centering seat washers 70mm long machined billet alloy rear wheel hubs. 8mm precision ground king-pin bolts Adjustable camber/caster Adjustable front ride height Adjustable Ackerman Machined alloy steering tie rods All aluminum components anodized gunmetal Left and right hand seat stays 9-litre removable fuel tank Arrow silver flat top suede steering wheel Front nosecone, nassa panel and sidepods Dynamic Arrow graphics kit One-piece machined alloy 3 spoke wheels; Front — 130mm (5.1") wide x 5" diameter; Rear — 205mm (8") wide x 5" diameter. Highly recommended for Two Cycle Junior and Two Cycle Junior HPV Classes!
AX-9 4S 30/32 Chassis - Inboard Drive for Yamaha/HPV and 4 Cycle Classes 30mm diameter main rails and cross rails/32mm diameter front hoop rails, stress relieved chrome moly tubing main chassis structure with optional removable front bar 103cm wheelbase 40mm axle supported by two bearings Arrow’s unique machined billet alloy one piece bearing flanges Two rear axle ride height settings Ventilated 18mm wide rear brake disc Machined billet alloy two spot caliper Machined billet alloy master cylinder Machined billet alloy sprocket hub and disc hub 70mm long machined billet alloy rear wheel hubs 10mm precision ground king-pin bolts Arrow’s unique self-centering seat washers. Adjustable camber/caster Adjustable front ride height Adjustable Ackerman Machined alloy steering tie rods All aluminum components anodized gunmetal Left and right hand seat stays Right hand seat stay moved over to allow inboard drive 9-litre removable fuel tank Arrow silver flat top suede steering wheel Front nosecone, nassa panel and sidepods Dynamic Arrow graphics kit One-piece machined alloy 3 spoke wheels; Front — 130mm (5.1") wide x 5" diameter; Rear — 180mm (7") wide x 5" diameter	Seat Strut Clearance for Inboard Drive
AX9-Junior Chassis - Inboard Drive for Yamaha/HPV and 4 Cycle Junior Sportsman Classes 28mm diameter rails, stress relieved chrome moly tubing main chassis structure with optional removable front bar 102cm wheelbase 30mm axle supported by three bearings Arrow’s unique machined billet alloy one piece bearing flanges Two rear axle ride height settings Ventilated 18mm wide rear brake disc Machined billet alloy two spot caliper Machined billet alloy master cylinder Machined billet alloy sprocket hub and disc hub machined billet alloy rear wheel hubs 10mm precision ground king-pin bolts Arrow’s unique self-centering seat washers. Adjustable camber/caster Adjustable front ride height Adjustable Ackerman Machined alloy steering tie rods All aluminum components anodized gunmetal Left and right hand seat stays Bolt on right hand seat stay moved over to allow inboard drive 9-litre removable fuel tank Arrow silver flat top suede steering wheel Front nosecone, nassa panel and sidepods Dynamic Arrow graphics kit One-piece machined alloy 3 spoke wheels; Front — 130mm (5.1") wide x 5" diameter; Rear — 180mm (7") wide x 5" diameter
AX-9 Rookie Cadet Chassis 28mm diameter rails, stress relieved chrome moly tubing main chassis structure with optional removable front bar 90cm wheelbase 30mm axle supported by three bearings Arrow’s unique machined billet alloy one piece bearing flanges Two rear axle ride height settings Arrow "Wave" slotted and drilled steel rear brake disc Machined billet alloy two spot caliper Machined billet alloy master cylinder Machined billet alloy sprocket hub and disc hub machined billet alloy rear wheel hubs 8mm precision ground king-pin bolts Arrow’s unique self-centering seat washers. Adjustable camber/caster Adjustable front ride height Adjustable Ackerman Machined alloy steering tie rods All aluminum components anodized gunmetal Left and right hand seat stays Bolt on right hand seat stay moved over to allow inboard drive 3-litre removable fuel tank Arrow silver flat top suede steering wheel Front nosecone, nassa panel and sidepods Dynamic Arrow graphics kit One-piece machined alloy 3 spoke wheels; Front — 130mm (5.1") wide x 5" diameter; Rear — 140mm (5.5") wide x 5" diameter THE Arrow Sprint Chassis for Cadet K80 class!
FREE SHIPPING! Comet will pay the shipping anywhere in the continental US on orders of two Arrow Karts! Karts must ship to the same address, free shipping applies to new karts in the box not assembled. Due to the amount of options available with a new chassis, we ask that you please Call Us to order your new chassis. We feel this is the best way to properly inform you of the best options available! Call Us Today to Order!!